2020 Vanair PTO Shaft Driven Air Compressor & Generator 9.6

2020 Vanair PTO Shaft Driven Air Compressor & Generator 9.6

Vanair's Genair® is an integratd rotary screw air compressor and weatherproof generator. Providing up to 185 CFM of air power and 9.6 kW of AC power. Eliminating the need for separate engine-drive air compressors, generators or power inverters, the Genair® is easily mounted to the truck's frame rail. The Totally Enclosed Fan Cooled (TEFC) generator has a high protection degree against dirt, grime and salt and is the ideal choice for harsh environments.

Features may include:

• Lifetime Warranty on Air End

• 100,000 Hours Design Life

• 100% Duty Cycle

• Greater Efficiency for Lower Engine RPMs

• Integrated Inlet Valve and Rear Discharge Provides Higher Ground Clearance

• Made in the USA

• Totally Enclosed Fan Cooled Sealed Generator

• No Brushes for Maintenance-Free Operation

• Automatic Voltage Regulation (AVR) Regulates to Within ± 2%

• 6.6 kW to 9.6 kW Producing 120 or 120/240V at a Constant 60 Hz

• Ground Fault Circuits and Outlet Panels Available to Meet Your Needs

• Intank Coalescer System Provides Greater Surface Area for Increased Oil Separation

• Coalescer is Protected from the Elements, Eliminating the Possibility of Rust or Damage from External Source

• Less Prescribed Maintenance and Waste Oil Recovery Costs

• Less Than 2 PPM Oil Carryover

• Pressure Rated to 250 PSIG

• 5 Year Warranty or 3000 Hours for Replacement on Coalescer Element Only

• Smaller Tank Design Makes Installation Easier

• Streamlined Fittings on the End of Tank

• ASMA and CRN Certified

• ABS plastic housing

• Dual stage

• Limited to 77 Ft. Lbs.

• Capable of Cooling Up to 200 CFM at Up to 175 PSI

• Air to Oil Heat Exchanger Driven by 12V Fan

Diagnostic Monitoring Display Includes:

• Remote Engine Speed Control

• Built-In Safety Features

• Complete Startup & Shutdown Capabilities

• Oil Temperature & Air Pressure System Checks

• Troubleshooting & Maintenance Display Assistance & Alerts

• LCD

• Full Synthetic Oil Exclusively Created for Rotary Screw Compressors

• Flash Point: 257 °C/495 °F

• Pour Point: -45 °C /-50 °F

• Outstanding Thermal and Oxidative Stability

• Reduced Oil Disposal Due to Extended Drain Intervals

• High-Temperature Shutdown

• High-Pressure Shutdown

• Air Pressure-Relief Safety Valve

• Minimum Pressure Valve

• Automatic Blowdown on Shutdown

• Oil Fill Plug Safety Relief