2020 Trail-EZE Rigging Industry TE80XT

2020 Trail-EZE Rigging Industry TE80XT

The TRAIL-EZE XT Hydraulic Tail model has the lowest load angle in the industry. This makes it our most popular trailer in the Rental Industry. With a 10 degree load angle, loading and unloading equipment with low ground clearance (forklifts, scissor lifts and man lifts) safely and efficiently is not a problem. We offer four capacity configurations (35, 40, 45 and 50 ton) and endless options. TRAIL-EZE Trailers will make certain you get the right trailer for the right job.

• FRAME: All MF80 high tensile steel. Custom manufactured beams designed for stress loads at a minimum of two times rated capacity.

• 1 1/2" Oak decking attached to every crossmember with (2) Torx head screws. 1/4" Steel tread plate covers the wheel area and 5' flip under.

• AXLES: (2) 22,500 lbs. Capacity with oil seal hubs

• 12 1/4" x 7 1/2" Air. Outboard drums with ABS, auto slack adjusters and spring brakes.

• (8) 6.75 x 17.5 Disc - pilot mounted wheels

• TIRES: (8) 235/75R x 17.5 16-Ply radials

• LANDING GEAR: Pin drop

• SUSPENSION: Air ride with raise and lower valve

• TIE DOWNS: Choice of D-rings, stakepockets or chain slots on 4' centers

• 12,000 lbs. winch mounted center front of upper deck with wireless remote. Controls are located on driver's side of upper deck.

• 16’ HYDRAULIC TAIL: (11' with a 5' flip under) - full width main tail hinge pin. The tail will carry 20,000 lbs. 4' back from the hinge pin. Exclusive locking device allows for great ground clearance.

• ELECTRICAL: ICC D.O.T. Standard sealed beam system with mid-ship turn signal

• Trailer sandblasted, primed and painted

• WARRANTY : Limited 5 Year Major Structural Warranty