2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

Swipe to View More

  • Year 2024
  • Make Generac Power Systems
  • Model Gaseous Industrial Generator, 150kW
  • Engine Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Lifter Type: Hydraulic Roller
2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_9_0

150kW Gaseous Generator (9.0L)

As electrical grid outages become more common it is important to be prepared for the potential of a power outage. Keep all your business’s essentials up and running with Generac's 9.0L 150kW generator. Our rugged natural gas generators give you all the backup power you need until grid power is restored. All of our industrial gas generators are completely cost effective and give you the best value for the output so you can afford more of what you need for your business.

Features may include:

Generator Enclosure
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
Spark-Ignited Engine
  • Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
Industrial Alternator
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® Controller
  • Generac engineers its generator controls with safety and convenience as top priorities.
Generator Paralleling
  • Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.

Engine

Engine Manufacturer Generac
Cylinder Liners 8 | Cylinder Head: Cast Iron
Engine Type V | Intake Air Method: Naturally Aspirated and Turbocharged
Displacement 543 in3 (8.9 L)
Bore 4.49 in (114.3 mm)
Stroke 4.25 in (107.95 mm)
Compression Ratio 10.5:1
Ignition High Energy
Engine Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Lifter Type: Hydraulic Roller
Lubrication Oil Pump Type: Gear Driven | Oil Filter Type: Full-Flow Spin-On Cartridge
Cooling Type : Pressurized Closed | Fan Type: Pusher

Fuel System

Fuel Type Natural Gas, Propane Vapor/Liquid

Drivetrain

Governor Electronic | Frequency Regulation (Steady State): ±0.25%

Battery

Battery Size: See Battery Index 0161970SBY | Voltage: 12 VDC | Ground Polarity: Negative

Electric

Electrical System Voltage: 12 VDC
Alternator Model: K0150124Y26 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Single Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%

Operational

Fan Speed Cooling: 2,386 RPM

Hydraulics

Maximum Pressure Operating Fuel Pressure NG/LPV: 7-11 in H2O (1.7- 2.7 kPa)

Dimensions

Fan Diameter 22 in (558.8 mm)

Capacities

Oil capacity Crankcase Capacity: 8.5 qt (8.0 L)

Features

Features Number of Main Bearings: 5 | Connecting Rods: Forged Steel
Construction Material Intake Valve Material: Steel Alloy | Exhaust Valve Material: Stainless Steel
Carburetion Down Draft

Product Photography