2020 E-Z Drill Inc. Single Drills 240B Vertical
- Year 2020
- Make E-Z Drill Inc.
- Model Single Drills
2020 E-Z Drill Inc. Single Drills 240B Vertical
2020 E-Z Drill Inc. Single Drills 240B Vertical
With the 240B combo drill, you can switch between rock drilling and core drilling with a bit guide and motor change for greater versatility on jobsites. Use it to drill within a 4-foot patch, and core and drill 5/8- to 2-1/2-inch-diameter holes to 18 inches deep. The fully pneumatic drill can operate at three speeds – 400, 900 and 1,600 rpm – and requires a minimum of 77 cfm. The rock drill configuration requires 100 cfm. Both rock and core drill motors and bit guides are included with the 240B drill.
Motor
Motor Power
Air: 2.1 HP (1.6 kW)
Operational
Operating Conditions
Air Consumption (minimum): 100 cfm (2.8 m 3 /min) | Impact: 36 ft. lbs. (49 blow) | Air Consumption (minimum): 77 cfm (2.2 m 3 /min)
Operating Speed
Hammer: 2200 bpm | 288 rpm | 3 – Speed: 400 rpm, 900 rpm, 1600 rpm
Hydraulics
Maximum Pressure
Operating: 90 psi (6.2 bar)
Dimensions
Dimensions
Drill Distance From Corner: 3 in (7.6 cm) | Drill Distance From Ground: up to 12 in (30.5 cm) | Drill Bit Diameter: 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) | Chuck Size: 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) | Bit Connection: 1 1/4 in x 7 in UNC
Depth, Maximum
Drill: 18 in (45.7 cm)
Length
Lower: 24 1/2 in (62.2 cm)
Width
30 in (76.2 cm)
Height
56 in (142.2 cm)
Weights
Weight
285 lbs (104.4 kg) | Drill Motor: 54 lbs (24.5 kg) | Drill Motor: 18 lbs (8 kg)
Features
Features
Rock Drill Motor (pneumatic): CP 32A | Core Drill Motor (pneumatic): CS Unitec