Current Arrow Master Mobile-Hydraulic-Hammer 1350T

2017 Arrow Master 1350T Base

2017 Arrow Master 1350T Base

Swipe to View More

  • Year 2017
  • Make Arrow Master
  • Model 1350T
Shop Arrow Master Pre-Owned
Product Details Specifications Photos
2017 Arrow Master 1350T Base

2017 Arrow Master 1350T Base

  • Year 2017
  • Manufacturer Arrow Master
  • Model Name 1350T
  • Trim Name Base
  • Generic Type (Primary) Hydraulic
  • Engine Manufacturer John Deere Powertech Series Model 4045T
  • Engine Type Tier 4, turbocharged
  • Fuel Type Diesel
  • Cylinder Liners 4
  • Cycle Time 4-cycle
  • Displacement 275 cubic-inch displacement (4.5 L)
  • Bore 4.2" (106 mm)
  • Stroke 5.00" (127 mm)
  • Engine Power 74 hp (55 kW) @ 2200 rpm intermittent
  • Engine Torque 195 lb-ft (269 Nm) @ 1700 rpm
  • Air Cleaner dry-type

2017 Arrow Master 1350T

The Arrow Hammer Model 1350T is a pneumatic-tired, mobile hydraulic hammer that operates on and off paved surfaces. A 74 HP John Deere, Tier 4, turbocharged, engine provides power for the Arrow Hammer. The standard synchromesh transmission allows the machine to be driven at speeds up to 20 MPH. During operation, the unit propels itself through a hydraulically-controlled creeper gear, providing speeds up to 63 FPM.

The Arrow Hammer Model 1350T breaks, cuts, and scores concrete, rock, and asphalt into sizes suitable for excavation, recovery, or cracking and seating. It compacts and tamps backfill with adjustable impact up to 13,000 foot pounds; or a fraction of that force when it’s necessary to protect what's underground. Arrow is unquestionably the most effective tool for trench compaction. Standard features include electronic stroke control, a pivoting mast for maximum impact on uneven surfaces, stop lights and reflectors, and mechanical back-up alarm. A sample of available options include all-weather cab, suspension seat, twist-lock parking brake, chip guard, plus a full range of accessory tools.

Engine

Engine Manufacturer John Deere Powertech Series Model 4045T
Engine Type Tier 4, turbocharged
Fuel Type Diesel
Cylinder Liners 4
Cycle Time 4-cycle
Displacement 275 cubic-inch displacement (4.5 L)
Bore 4.2" (106 mm)
Stroke 5.00" (127 mm)
Engine Power 74 hp (55 kW) @ 2200 rpm intermittent
Engine Torque 195 lb-ft (269 Nm) @ 1700 rpm
Air Cleaner dry-type

Drivetrain

Transmission Conventional standard, synchromesh totally enclosed transmission | Speed: Three forward speeds up to 20 mph (32 km/h) and one reverse speed. | Creeper Interlock: Supplied with a mechanical device that prevents the creeper gear from being engaged if the travel transmission is in gear
Features Creeper Drive: Patented hydraulic creeper drive mounted directly on the transmission. Creep speed is infinitely variable up to 63 fpm (19.2 mpm) in forward or reverse
Steering Power: Full power steering that allows unit to be steered when engine is not running. Steering wheel is mounted to a fixed steering column attached to the dashboard.

Chassis

Chassis All-welded unitized frame

Brakes

Brake System Type Four wheel hydraulic independent system
Parking Brake Mechanical parking brake.

Wheels & Tires

Tire Pressure, Front Driving tires (Dual): Inflation 80 psi (550 kPa). | Steering tires: Inflation 80 psi (550 kPa).
Tire Pressure, Rear Driving tires (Dual): Inflation 80 psi (550 kPa). | Steering tires: Inflation 80 psi (550 kPa).
Tires, Front Specification Driving tires (Dual): Load-range E - 235/80R17 | Steering tires: Load-range E - 235/80R17
Tires, Rear Specification Driving tires (Dual): Load-range E - 235/80R17 | Steering tires: Load-range E - 235/80R17
Tire Tread Thickness, Front Wheels: 90-1/2" (2298.7 mm)
Tire Tread Thickness, Rear Wheels: 94-1/2" (2400.3 mm)

Electric

Horn Electric 12-volt horn to comply with OSHA requirements.
Electrical Stop Lights and Reflectors: Recessed combination stop and tail lights to comply with OSHA requirements. | Electrical System: 12-volt system with (1) one Group 31 - 775 CCA battery and a 75 amp alternator

Operational

Operating Conditions Impact Energi: 13,000 ft-lb (17680 Nm) Maximum | Hammer Cycles 24" (.6 m) Stroke: 42 Per Minute | Hammer Cycles Full Stroke: 24 Per Minute
Operating Speed Maximum Road Speed: 20 mph (32 km/h)

Hydraulics

Hydraulic Pump 44 gpm (167 lpm) @ 1,750 psi (121 bar) for hammer activation and 16 gpm (61 lpm) @ 1,500 psi (103 bar) for all other functions.
Hydraulic Type Hydraulic system consists of a tandem hydraulic pump driven directly from the engine crankshaft. The system includes suction strainers, a return in-line filter and oil cooler.

Dimensions

Length of Stroke: 1' to 9' (.3 m - 2.7 m) Maximum | In working position (overall): 13'-8" (4.2 m) | In traveling position (overall): 14'-4" (4.4 m)
Height In working position (overall): 14'-3" (4.3 m) | Traveling position with ROPS (overall): 7'-9" (2.3 m)
Wheelbase 97" (2464 mm)
Overall Width 88-1/2" (2248 mm)
Dimensions Mast Traverse Distance (from center line of tool): 68-1/2" (174 cm)

Capacities

Fuel Capacity 30 Gallons (113 L)
Hydraulic Capacity 24 Gallons (91 L)
Axle Capacity, Front wheel drive with single hypoid gear: 11,500 lbs. (5,215kg).
Axle Capacity, Rear wheel steering: 6,000 lbs. (2,720kg)

Weights

Weight Hammer: 1,356 lbs. (616 kg)
Weight, As Shipped (Approximate): 9,600 lbs. (4,355 kg)

Features

Features Fenders: Heavy-gauge metal fenders to provide protection of operator and vehicle from flying debris. | Lead: One-piece lead that lays back hydraulically for traveling/transport. | Rollover Protection Structure (ROPS) With Seat Belts: Rollover protection structure certified to SAE J1040 for additional operator safety

Product Photography