2020 Mustang Track Loaders 2150RT

Information

2020 Mustang Track Loaders 2150RT

Features may include:

Performance

The Mustang 2150RT Track Loader was designed from the ground up...

Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW)

Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.

Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.

Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work

Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator's Cab

The extra-large, state-of-the art operator’s station on the 2150RT Track Loader is designed for optimal operator comfort resulting in more productivity.

Pilot controls provides the operator true 1:1 proportional control over the drive system.

All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.

Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.

Standard, selectable 2-speed drive motors, horn and backup alarm.

Multi-purpose LCD display provides easy readout during operation.

Single button allows simple scrolling and selection of various display functions.

Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:

Engine Response

Horsepower Management

Pump Swash Plate Position

Controls

Controls on the 2150RT Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Cab forward design enhances the view to the bucket.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • Mustang
  • Track Loaders 2150RT
  • 4TNV98C-NMSL
  • Axial Piston
  • Available
  • Bucket: 73.9" (1877 mm)
  • To Hinge Pin - Fully Raised: 128" (3251 mm) | Dump - Fully Raised: 98" (2489 mm) | Specified: 67.7" (1720 mm)

    • Specifications

    • 2020
    • Mustang
    • Track Loaders
    • 2150RT
    • Compact
    • 4TNV98C-NMSL
    • Yanmar
    • 4-Stroke Turbo
    • Net @ 2500 rpm: 72 hp (53.7 kW)
    • Peak @ 1600 rpm: 217 ft.-lbs. (294 Nm)
    • 202 cu.in. (3.3 l)
    • Tier IV
    • 4
    • Axial Piston
    • Voltage/Amperage: 14V/100A
    • Bucket Breakout - Tilt Cylinder: 6,631 lbs. (3008 kg) | Bucket Breakout - Lift Cylinder: 6,481 lbs. (2940 kg) | Dump Angle - Fully Raised: 39° | Pull / Tractive Effort: 12,133 lbs. (5503 kN)
    • Ground Speed - Single Speed: 5.9 mph (9.5 km/hr) | Ground Speed - Two Speed: 8.8 mph (14.2 km/hr)
    • 4.8 psi (0.33 bar)
    • Auxiliary: 21.8 gpm (82.5 l/min) | High-Flow: 35.9 gpm (135.8 l/min)
    • Reach - Fully Raised: | Carry Position: 8.2" (208 mm) | Track Gauge: 51.7" (1313 mm) | Crawler Base: 58.4" (1483 mm)
    • Operating - Fully Raised: 168" (4267 mm) | Height at ROPS: 83.1" (2111 mm)
    • With Bucket - Standard Counterweight: 148.4" (3769 mm) | Without Bucket - Standard Counterweight: 116.5" (2959 mm)
    • Less Bucket: 69.5" (1765 mm)
    • To Hinge Pin - Fully Raised: 128" (3251 mm) | Dump - Fully Raised: 98" (2489 mm) | Specified: 67.7" (1720 mm)
    • Bucket: 73.9" (1877 mm)
    • 12.6" (320 mm)
    • 17.7" (450 mm)
    • At 35% of Tipping Load: 2,150 lbs. (975 kg) | At 50% of Tipping Load: 3,072 lbs. (1393 kg) | Tipping Load: 6,144 lbs. (2787 kg)
    • Reservoir Tank: 13.8 gal. (52.2 l)
    • Tank: 24 gal. (91 l)
    • Pump: 11 qts. (10.4 l)
    • 3.8 gal. (14.4 l)
    • 9,000 lbs. (4491 kg)
    • Roller Type: Steel
    • Rubber | Rollers: 5

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.