2017 Arrow Master 1350T Base

Information

2017 Arrow Master 1350T

The Arrow Hammer Model 1350T is a pneumatic-tired, mobile hydraulic hammer that operates on and off paved surfaces. A 74 HP John Deere, Tier 4, turbocharged, engine provides power for the Arrow Hammer. The standard synchromesh transmission allows the machine to be driven at speeds up to 20 MPH. During operation, the unit propels itself through a hydraulically-controlled creeper gear, providing speeds up to 63 FPM.

The Arrow Hammer Model 1350T breaks, cuts, and scores concrete, rock, and asphalt into sizes suitable for excavation, recovery, or cracking and seating. It compacts and tamps backfill with adjustable impact up to 13,000 foot pounds; or a fraction of that force when it’s necessary to protect what's underground. Arrow is unquestionably the most effective tool for trench compaction. Standard features include electronic stroke control, a pivoting mast for maximum impact on uneven surfaces, stop lights and reflectors, and mechanical back-up alarm. A sample of available options include all-weather cab, suspension seat, twist-lock parking brake, chip guard, plus a full range of accessory tools.

Photos

Highlights

  • Des Moines, Iowa
  • 2017
  • Arrow Master
  • 1350T Base
  • All-welded unitized frame
  • Conventional standard, synchromesh totally enclosed transmission | Speed: Three forward speeds up to 20 mph (32 km/h) and one reverse speed. | Creeper Interlock: Supplied with a mechanical device that prevents the creeper gear from being engaged if the travel transmission is in gear
  • Diesel
  • Available
  • In working position (overall): 14'-3" (4.3 m) | Traveling position with ROPS (overall): 7'-9" (2.3 m)

    • Specifications

    • 2017
    • Arrow Master
    • 1350T
    • Base
    • Hydraulic
    • John Deere Powertech Series Model 4045T
    • Tier 4, turbocharged
    • Diesel
    • 4
    • 4-cycle
    • 275 cubic-inch displacement (4.5 L)
    • 4.2" (106 mm)
    • 5.00" (127 mm)
    • 74 hp (55 kW) @ 2200 rpm intermittent
    • 195 lb-ft (269 Nm) @ 1700 rpm
    • dry-type
    • Conventional standard, synchromesh totally enclosed transmission | Speed: Three forward speeds up to 20 mph (32 km/h) and one reverse speed. | Creeper Interlock: Supplied with a mechanical device that prevents the creeper gear from being engaged if the travel transmission is in gear
    • Fenders: Heavy-gauge metal fenders to provide protection of operator and vehicle from flying debris. | Lead: One-piece lead that lays back hydraulically for traveling/transport. | Rollover Protection Structure (ROPS) With Seat Belts: Rollover protection structure certified to SAE J1040 for additional operator safety
    • Power: Full power steering that allows unit to be steered when engine is not running. Steering wheel is mounted to a fixed steering column attached to the dashboard.
    • All-welded unitized frame
    • Four wheel hydraulic independent system
    • Mechanical parking brake.
    • Driving tires (Dual): Inflation 80 psi (550 kPa). | Steering tires: Inflation 80 psi (550 kPa).
    • Driving tires (Dual): Inflation 80 psi (550 kPa). | Steering tires: Inflation 80 psi (550 kPa).
    • Driving tires (Dual): Load-range E - 235/80R17 | Steering tires: Load-range E - 235/80R17
    • Driving tires (Dual): Load-range E - 235/80R17 | Steering tires: Load-range E - 235/80R17
    • Wheels: 90-1/2" (2298.7 mm)
    • Wheels: 94-1/2" (2400.3 mm)
    • Electric 12-volt horn to comply with OSHA requirements.
    • Stop Lights and Reflectors: Recessed combination stop and tail lights to comply with OSHA requirements. | Electrical System: 12-volt system with (1) one Group 31 - 775 CCA battery and a 75 amp alternator
    • Impact Energi: 13,000 ft-lb (17680 Nm) Maximum | Hammer Cycles 24" (.6 m) Stroke: 42 Per Minute | Hammer Cycles Full Stroke: 24 Per Minute
    • Maximum Road Speed: 20 mph (32 km/h)
    • 44 gpm (167 lpm) @ 1,750 psi (121 bar) for hammer activation and 16 gpm (61 lpm) @ 1,500 psi (103 bar) for all other functions.
    • Hydraulic system consists of a tandem hydraulic pump driven directly from the engine crankshaft. The system includes suction strainers, a return in-line filter and oil cooler.
    • Mast Traverse Distance (from center line of tool): 68-1/2" (174 cm)
    • of Stroke: 1' to 9' (.3 m - 2.7 m) Maximum | In working position (overall): 13'-8" (4.2 m) | In traveling position (overall): 14'-4" (4.4 m)
    • In working position (overall): 14'-3" (4.3 m) | Traveling position with ROPS (overall): 7'-9" (2.3 m)
    • 97" (2464 mm)
    • 88-1/2" (2248 mm)
    • 30 Gallons (113 L)
    • 24 Gallons (91 L)
    • wheel drive with single hypoid gear: 11,500 lbs. (5,215kg).
    • wheel steering: 6,000 lbs. (2,720kg)
    • Hammer: 1,356 lbs. (616 kg)
    • (Approximate): 9,600 lbs. (4,355 kg)

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.